Petal Passion – Stampin' with inkybutterfly

Take Heart #GDP134

Hi there Everyone,

Today I am sharing my entry for the Global Design Project. This week is a sketch challenge.

You can see what the design team created by clicking here!

This is my project.

I have used the gorgeous Sweet Sugarplum card stock as the base.

I also punched out an Everyday Label and tiny heart from the Cookie Cutter punch.

A piece of Petal Passion designer series paper was coloured with Pink Pirouette ink pad applied directly to the paper.

A one inch strip of Pink Pirouette card stock was adhered to some black card stock. This was wrapped with black bakers twine before adhering to the card.

I then added the label shape using dimensionals. A die cut heart was embellished with punched heart, then adhered with a dimensional.

Finally, I picked out a greeting from the Sunshine Sayings stamp set. This was cut with the Classic Label punch.

I hope you enjoyed this project. The supplies used are listed below.

Thanks for stopping by and Happy Stampin’!

Verity x

tams# 22097

Product List

Sweet Sugarplum A4 Cardstock [141423] £7.25	Pink Pirouette A4 Card Stock [116203] £7.25	Basic Black A4 Card Stock [121688] £7.25
Petal Passion Designer Series Paper [145589] £10.00	Pink Pirouette Classic Stampin’ Pad [126956] £6.00	Whisper White A4 Card Stock [106549] £8.25
Basic Black Baker’s Twine [134576] £2.75	Sunshine Sayings Clear-Mount Stamp Set [141594] £21.00	Tuxedo Black Memento Ink Pad [132708] £5.50
Everyday Label Punch [144668] £16.00	Cookie Cutter Builder Punch [140396] £16.00	Classic Label Punch [141491] £16.00
Sweet & Sassy Framelits Dies [141707] £32.00	Stampin’ Dimensionals [104430] £3.75	Fast Fuse Adhesive [129026] £9.00

Emerald Passion

Good Morning Everybody,

For today’s card, I am using the Petal Passion Suite.

To make the square topper I used;

3-3/4 inch Emerald Envy card stock,

3-1/2 inch Whisper White card stock,

3-3/8 inch Petal Passion DSP.

These layers were adhered together. I added dimensionals between the white and green layers, the others were adhered flat using Snail.

The leaf sprig was die cut from Emerald Envy card stock. I also stamped two of the little birds and die cut these too.

These were positioned along the bottom edge of the square topper.

A small bow was tied from Emerald Envy Striped Grosgrain ribbon.

The sentiment was stamped with Emerald Envy ink and positioned at the top of the card the balance the embellishments.

I hope you enjoyed this project. The supplies used are listed and linked to the online store at the bottom of this post.

Today is the last day of Sale-a-bration. Don’t miss out on great free products with a qualifying order of £45. Find out more here but be quick!

Now is a great time to join Stampin’ Up! Pick your own starter kit products to start your new hobby or business today! Find out more about joining here!

If you live in the UK, France, Germany, Austria or The Netherlands, I would love to have you onboard as part of my team!

tams# 21669

Product List

Petal Palette Clear-Mount Bundle [145974] £56.50	Petal Passion Designer Series Paper [145589] £10.00	Tuxedo Black Memento Ink Pad [132708] £5.50
Basic Black A4 Card Stock [121688] £7.25	Whisper White A4 Card Stock [106549] £8.25	Emerald Envy Classic Stampin’ Pad [141396] £6.00
Emerald Envy 3/8″ Striped Grosgrain Ribbon [144226] £6.25	Stampin’ Trimmer [129722] £27.00	SNAIL Permanent Adhesive [104332] £6.25

Petal Passion Sweet Box

Good Morning,

I don’t make many 3D projects. I find them quite tricky to do, but this turned out really well.

The box itself is a pizza style box made with full A4 sheet of Powder Pink card stock.

The card was scored at 1 inch and 2 inches on all four sides.

The long side was also scored at 5-3/8 inches and 6-3/8 inches.

The score lines were folded and burnished.

Each corner has four squares. The three outer squares were cut away. The remaining square was cut to form a tab.

The centre score lines were also cut in to tabs.

The Petal Passion paper was coloured using a brayer and Flirty Flamingo ink. Whilst flat, paper was added to the lid and the inside panels.

The box was constructed by forming the base first, then the lid.

For a snug closure a belly band was made with Powder Pink ribbon and some flowers from the Petal Palette stamp set.

The flowers were stamped with Memento ink, coloured with Stampin’ Blends and die cut the the coordinating framelits.

I hope you enjoyed this project. The supplies used are listed below.

Thanks for stopping by and happy Stampin’!

Verity x

tams# 20885

Product List

Petal Palette Clear-Mount Bundle [145974] £56.50	Petal Passion Designer Series Paper [145589] £10.00	Simply Scored [122334] £27.00
Whisper White A4 Card Stock [106549] £8.25	Powder Pink A4 Cardstock [144251] £7.25	Tuxedo Black Memento Ink Pad [132708] £5.50
Pink Pirouette Stampin’ Blends Markers Combo Pack [144604] £8.00	Old Olive Stampin’ Blends Markers Combo Pack [144597] £8.00	Sponge Brayers [141714] £7.25
Flirty Flamingo Classic Stampin’ Pad [141397] £6.00	Powder Pink 1/2″ Finely Woven Ribbon [144134] £6.25	Bone Folder [102300] £6.25

Petal Palette and Stampin’ Blends

Happy Sunday!

Today’s project is easy to put together with some colouring techniques thrown in too.

The card base is made with Cherry Cobbler card stock cut a 4-1/8 inches, (10.5cm) and scored at 5-7/8 inches, (15cm).

A piece of Petal Passion DSP was cut to 5-1/2 inches, (14cm) by 3-3/4 inches,(9.5cm). This was coloured using a Stampin’ Sponge and Calypso Coral ink.

This was adhered to a Whisper White card layer, 5-3/4 inches, (14.5cm) by 4 inches, (10cm).

Dome Silver Natural Trim was adhered across the lower portion of the card.

The floral from the Petal Palette stamp set was stamped with Memento ink and coloured with Stampin’ Blends.

I hope you enjoyed this project. The supplies used are listed and linked to the online shop below.

Thanks for stopping by and happy Stampin’!

Verity x

tams# 20485

Product List

Petal Palette Clear-Mount Bundle [145974] £56.50	Tuxedo Black Memento Ink Pad [132708] £5.50	Whisper White A4 Card Stock [106549] £8.25
Cherry Cobbler A4 Card Stock [121681] £7.25	Petal Passion Designer Series Paper [145589] £10.00	Calypso Coral Classic Stampin’ Pad [126983] £6.00
Stamping Sponges [141337] £3.25	Old Olive Stampin’ Blends Markers Combo Pack [144597] £8.00	Calypso Coral Stampin’ Blends Markers Combo Pack [144045] £8.00
Cherry Cobbler Light Stampin’ Blends Marker [144576] £4.00	Stampin’ Dimensionals [104430] £3.75	Silver 1/4″ (6.4 Mm) Natural Trim [141485] £6.50

Monochrome Wishes

Hi Folks,

When you don’t know what colour to use… Why not try a monochrome look.

This was partly inspired by the Petal Passion DSP which I have used on the background.

The sentiment is taken from a Sale-a-bration set, Happy Wishes. You may choose this with a qualifying order. Check out Sale-a-bration offers here!

I used an old favourite floral set, Falling Flowers and it’s coordinating dies to decorate the top corner of the card.

The flowers were shaped with a stylus and adhered with glue dots. The centers were adorned with Rhinestone jewels. These are self adhesive and so easy to use if you like a bit of extra bling.

I hope you enjoyed this project. The supplies used are listed and linked below.

Thanks for stopping by and happy Stampin’!

Verity x

tams# 19137

Product List

Happy Wishes Clear-Mount Stamp Set [147227] £0.00	Tuxedo Black Memento Ink Pad [132708] £5.50	Whisper White A4 Card Stock [106549] £8.25
Petal Passion Designer Series Paper [145589] £10.00	Falling Flowers Clear-Mount Stamp Set [139556] £18.00	May Flowers Framelits Dies [140276] £28.00
Stampin’ Trimmer [129722] £27.00	Stampin’ Pierce Mat [126199] £4.50	Glue Dots [103683] £4.75

Two of You Together #GDP120

This week the Global Design Project has a Case the Designer challenge. This was created by Krista Frattin. You can see what the design team created here.

And this is what I have created:

The background on the original uses DSP, which I have also pulled in to my design. This paper is black and white, but I coloured the flowers with Stampin’ Blends.

The centrepiece uses the pretty florals from the Petal Palette stamp set. The images were stamped with Memento ink and coloured with Blends.

Coordinating dies were used to cut the images. One was adhered flat whilst the other was raised on dimensionals.

A piece of ribbon was added along the bottom, also inspired by the example card.

A pair of little birds were stamped, coloured and die cut. The were added to the flowers.

The example uses the Everyday Label punch to mount the sentiment. I have used this to cut my chosen sentiment from Whisper White card stock. A second label was cut from Pink Pirouette card stock.

Some silver bakers twine was looped underneath the label which is also visible on the original design.

I hope you enjoyed this project. The supplies used are listed below.

Thanks for stopping by and happy Stampin’!

Verity x

tams# 19001

Product List

Petal Palette Clear-Mount Bundle [145974] £56.50	Petal Passion Designer Series Paper [145589] £10.00	Whisper White A4 Card Stock [106549] £8.25
Pool Party A4 Card Stock [124391] £7.25	Pink Pirouette A4 Card Stock [116203] £7.25	Silver Baker’S Twine [145569] £3.75
Pool Party Stampin’ Blends Markers Combo Pack [144605] £8.00	Pink Pirouette Stampin’ Blends Markers Combo Pack [144604] £8.00	Old Olive Stampin’ Blends Markers Combo Pack [144597] £8.00
Pool Party 3/8″ Shimmer Ribbon [144152] £6.25	Everyday Label Punch [144668] £16.00	Clear Wink Of Stella Glitter Brush [141897] £7.25