Author: Stampin' with inkybutterfly

Good morning,

If you’ve been following me over the last few days, you will know I have been experimenting with alternative colour combinations with the current In Colours. Today I have used Emerald Envy and a peek of Peekaboo Peach!!

I started by using a die from Eastern Medallions to cut in to a piece of Fresh Fig designer paper. This was adhered to a Very Vanilla card base.

Cut another medallion to fit in the centre if the first. This was cut from Emerald Envy and added to the card with dimensionals.

The sentiment was stamped in Fresh Fig ink and die cut with a Layering Circle die. This was mounted on to a scalloped circle cut from Peekaboo Peach. This was added to the card with dimensionals.

I hope you have enjoyed this project.

The supplies used are listed and liked below.

Happy Stampin’!

Product List 

Good morning,

I thought I would try another colour combo today, mixing new In Colours with existing ones. This card uses Tranquil Tide and Flirty Flamingo!

The card base is made using Very Vanilla card stock. The designer paper is cut to 3 7/8 by 5 5/8 and adhered flat to the card base.

Cut Flirty Flamingo and Tranquil Tide card stock using the largest Eastern Medallion dies. Layer these together with some wet glue. Adhere to the card with dimensionals.

Stamp the sentiment in coordinating ink and die cut using a scalloped circle die. Add to the card with dimensionals.

That’s it! Love it!

The Eastern Palace bundles are amazing value and only available during May. 

The supplies used are listed and linked below.

Product List 

Good morning,

I want to share this project today.

The Eastern Palace bundle has this great lime designer paper, so vibrant. I have paired it with Sweet Sugarplum.

The Sugarplum layer was cut to 4 by 5 3/4. 

The designer paper was cut to 3 7/8 by 5 5/8. A die was used to cut the decorative elements into the paper.

This was adhered to the Sugarplum layer, then to the card base.

The sentiment was stamped in Sweet Sugarplum ink, and cut with a circle die. This was added to the card with dimensionals.

I hope you enjoyed this ptoject.

Supplies used are listed and linked below.

Happy Stampin’!

Product List 

Hey there,

Today’s project uses the retiring Cucumber Crush card stock.

For the pencil box, cut a A4 sheet of card stock at 6 inches.

Score the long side at 1, 2 1/2, 3 1/2, and 5 inches.

Score the short side at 1 inch, rotate 180 degrees and score again at 1 inch.

Stamp with Tranquil Tide ink, evenly spacing the motifs. 

Cut 6 tabs. Form the base of the box with 4 of the tabs. The remaining 2 tabs will form the lid.

The paperclip box is constructed in the same way….just smaller!

Cut remaining card stock to 5 1/2 by 2 5/8. Decorate with stamps as desired.

Score the long side at 1/2, 2 1/2,  3, and 5 inches.

Score the short side at 1/2 inch. Rotate and score again at 1 inch.

Decorate with a medallion cut from Tranquil Tide card stock. Stamp the sentiment and cut with the smallest circle die. Adhere using dimensionals.

I hope you enjoyed this project.

Supplies used are listed and linked below. Click on an image to be redirected to the shop.

Happy Stampin’!

Product List

Hello again,

I hope you didn’t lose that piece of Delightful Dijon card stock from yesterday…. Time to use it.

To start, remove 3/4 from the long side then svore all 4 sides at 1 3/8 inches.

Cut and fold tabs to form the box base.

The lid is made using Tranquil Tide card stock from the Eastern Palace bundle. Cut to 5 1/4 by 7 3/8.

Wipe the surface of the card with an embossing buddy. Stamp the pattern in versamark ink, cover in clear embossing powder and heat set.

Score all 4 sides at 1 1/4 inches. Cut and fold tabs to create the box lid.

To decorate, cut shapes in Fresh Fig, Tranquil Tide and Delightful Dijon. The greting was stamped using Tranquil Tide ink.

I hope you enjoyed this project.

The supplies used are listed and linked below. Click on an image to be redirected to the shop.

Happy Stamping!

Product List

Good Morning!

To continue the Eastern Palace theme, I will be sharing some projects incorporating other Stampin’ Up! products.

For today’s project, I am using the retiring In Colour, Delightful Dijon.

For the base, cut an A4 sheet of Delightful Dijon on the long side at 5 1/2 inches. Put this piece to one side, it will be used in tomorrow’s project.

The remaining piece is scored at 1 3/4 inches on all 4 sides. Cut and fold tabs to create the box.

For the lid, use Fresh Fig card stock from the Eastern Palace bundle. Cut this to 5 1/4 by 7 3/8.

Wipe the surface with an Embossing Buddy. Using versamark ink, stamp the pattern over the entire piece. The shape fits together beautifully. (Practice on scrap first). Cover with clear embossing powder and set with a heat tool.

Score at 1 1/4 on all 4 sides. Cut and fold tabs to form the box.

To decorate, cut the large medallion in Delightful Dijon.

Cut two 4 pointed shapes from Fresh Fig, and layer them together.

Stamp the greeting in versamark and emboss with clear powder. Cut using a scalloped Layering Circle die.

I hope you enjoyed this project.

Supplies are listed and linked below. Click a product to be redirected to the shop.
Product List

Happy Bank Holiday! 

Stampin’ Up! are treating customers with the early release of this beautiful suite. This will be available to order from 2nd May. It is anticipated that this will sell quickly, so don’t miss out.

There are 2 bundles that have been put together to suit different budgets.

The suite also gives a sneak peek to the new In Colours for 2017 – 19. It includes designer paper, tassles and metallic vinyl stickers.

The Eastern Beauty stamp set has some great images and sentiments.

AND …. there are some amazing framelits too.

Stop by tomorrow for some card ideas using this set.

Don’t forget there are still items on sale on the retirement list and clearance racks.

Happy Crafting!

Hello Crafters,

One of the first stamp sets I bought from Stampin’ Up! was Papillon Potpourri. Sadly, this is retiring at the end of May.

So in honour of this set here is a really simple card.

Using a rainbow of colours, I stamped out one of the butterflies and punched them out with the coordinating punch. 

These were adhered to white 1 inch circles, wings bent up for a bit of realism.

The background was stamped with Gorgeous Grunge in Sahara Sand and Smoky Slate.

Arrange the butterflies as desired. The sentiment is from That’s the Tag.

I hope you like this card. Retiring supplies are only available while stocks last. There is a link to the shop in the menu.

Happy Crafting!

Edit

Good Morning Everyone,

Lift Me Up is my favourite set in the Occasions catalogue… I am so happy it will be staying with us.

This sunburst design in the Cupcakes & Carousels paper stack is the perfect accompaniment. 

Four balloons were stamped and die cut. The larger balloon was adhered with Stampin’ Dimensionals.

Hope you like this project. Shop for the supplies used by clicking on the links in the menu.

Happy Crafting

Hi there crafters,

There is something magical about heat embossing…using clear powder gives a great tone on tone tone look.

I have used the Love Sparkles stamp set. 

The card stock was prepared with an embossing buddy. This prevents excess powder sticking where it isn’t wanted.

The star image was then stamped with clear versamark embossing ink. Add the embossing powder and tip off the excess. Heat the powder until it melts and turns glossy.

The sentiment was embossed in gold and then die cut with a Stitched Shape framelit. 

The card was finished with some ribbon and rhinestones.

I hope you have enjoyed this project. 

Thanks for stopping by.

Hello again Everyone!

It’s my final week as a Pootler’s design team member…. This has been so much fun. So I am ending with a 3D project. I am very pleased with this. 

6 months ago I couldn’t make boxes for toffee…but practice makes perfect.

For the base, cut some Whisper White to 6 1/2 by 11 inches. Stamp the leaf in Cucumber Crush ink. Then score all 4 sides at 2 1/4. burnish and notch out tabs as below:

For the insert, also in Whisper White, cut to 8 by 3 1/2 and score at 3/4 inch. Die cut 3 holes. Start with the end 2 and then it is easier to centre the middle one. Burnish and notch out:

For the lid, cut some Cucumber Crush card to 11 1/2 by 7 inches. Stamp the leaf as before. Score at 1 1/4 and 2 1/2. The lid will be reinforced for added strength:

To add a little something, I wrappex some ribbon around the lid, secured discreetly with some fast fuse.

I love it… Hope you do too!

Supplies used to make this project are listed and linked below:

Product List

Good Morning,

Using up scraps of paper can be challenging. I got this idea from fellow demonstrator Dena Rekow in the US. Whilst her design uses strips, I have used squares to create a patchwork.

All the squares are 2 by 2 inches and simply adhered to the card base.

I added some “stitching” with a fine pen. 

The sentiment was stamped in Early Espresso ink on Very Vanilla card stock.

The supplies used in this project are listed and linked below. 

Some products are currently on the retiring list, shop now to avoid disappointment.

The clearance rack has also been updated. There a some great bargains to be had. Go check it out, once they are gone….they are gone!!

Product List

Hi there, 

Today’s projects were created to use up these beautiful doilies which, sadly, will not be carried in to the new catalogue in June.

All the cards are constructed in the same way with some variation on the theme.

The idea of making a background had been in my mind for a while.  The first card is made with black card and the vanilla side of the doily. 

A sentiment was added to the card. This was heat embossed in white.

Here, I have used Perfect Plum and white doilies arranged slightly differently. The sentiment was added with Elegant Eggplant card, also heat embossed.

This came next, using Night of Navy card.

Finally, this was made with Delightful Dijon. 

I hope you like these projects.

Supplies used are listed and linked below.

Product List

Good Morning,

Let’s hope we won’t be needing these for too much longer….but this is such a cute card.

The umbrellas were stamped with Smokey Slate, Night of Navy and Watermelon Wonder then die cut with the matching framelits. These shapes could be cut out by hand very easily too.

They are added to the card using tape and dimensionals for a layered effect.

The rain drops were added using Pool Party and Soft Sky ink.

The sentiment was also stamped in Night of Navy ink and cut in to a banner and added across the middle of the card.

I hope you like this project and give this a go.

The supplies used are listed and linked below.

Product List